One more Mountune Powerupgrade Ford Focus RS Mk3 up to 400

Phase 3 pakket van Mountune geeft de Ford Focus RS al aardig wat meer pk’s, met deze upgrade hebben ze de aantal pk’s op weten te schroeven naar 395pk, in de piek zelfs 400pk.

Wat houdt het pakket in en wat krijg je ervoor terug, je leest het hieronder:

Mountune M400 power upgrade kit Focus RS Mk3

Mountune M400 power upgrade kit Focus RS

The Mountune M400 power upgrade fully optimises the potent performance available from the 2.3-litre EcoBoost, whilst running a standard turbo.

Utilising a selection of fully proven mountune hardware – some of which endorsed by Ford themselves, to help lower charge temperatures, improve pressure drops and remove back-pressure, means the engine is now able to operate more efficiency, allowing the impressive peak 400PS and 560Nm power and torque output to be more safely, and reliably achieved.

Mountune M400 power upgrade kit Focus RS Mk3

As with all mountune power upgrade kits, M400 is available as a complete power upgrade from standard, but equally continues the modular approach, allowing owners to add the required hardware in stages, before culminating in what’s undoubtedly the most well-rounded performance upgrade available, that retains the standard turbocharger.

From both years and hundred’s of thousands of miles of product development and durability testing of the RS-spec 2.3-litre EcoBoost engine, mountune’s knowledgebase is unequalled regarding the engine and also, the calibrations strengths and limitations.

Mountune M400 power upgrade kit Focus RS Mk3

It’s from this rich test bed of data that M400 has been formed, pushing the envelope of performance as far as possible. Upgrading hardware that would otherwise be beyond its safe operating point to ensure maintainable, repeatable performance and calibrating to retain the maximum possible drivability, and ultimately, reliability.

Like previous RS releases, the M400 mTune also includes an anti-theft mode and dyno mode, to disable/enable the RDU (Rear Drive Unit) for easy dyno testing, directly from the handset.

Mountune M400 power upgrade kit Focus RS Mk3

Kit Contents:

  • High-flow induction kit
  • Sound Suppression Chamber (SSC)
  • Uprated turbo re-circ valve
  • High-flow hard pipe
  • High-performance alloy intercooler
  • 3″ downpipe with 200-cell sports catalyst
  • 3″ V3 cat-back exhaust
  • mTune handset with M400 calibration
  • Two mountune badges

Mountune M400 power upgrade kit Focus RS Mk3

mTune Features:

ECU performance calibration transfer
Supplied complete with three user-interchangeable calibrations

1 – M400 calibration with optimised exhaust (with randomised pops)
2 – Anti-theft mode
3 – OE calibration (via future firmware release)

Mountune M400 power upgrade kit Focus RS Mk3

DYNO MODE – Enable / Disable RDU with the push of a button for easy dyno operation / when only a 2WD dyno is available.

  • In-field calibration updates
  • 0-60 times
  • ¼ mile times
  • Monitor 6 OBD channels
  • Adjustable shift light
  • Full data logging
  • DTC reading / clearing
  • Soft touch rear case
  • LCD screen
  • Ambient light sensor

Please Note: The warranty of the vehicle being updated with this upgrade may be affected. The M400 upgrade kit is not Ford-endorsed.

To maintain any warranty provision otherwise entitled to you, and to ensure correct operation, reliability and performance figures quoted are achieved, calibrations loaded via an mTune handset must be installed together with the correct mountune® hardware.

Source | Mountune Store

Mountune M400 power upgrade kit Focus RS Mk3

Reacties zijn gesloten.